Nokia camera on standby and operation failed solution

This solution can be applied in all Gsm gadgets box using a DCC file.

FAQ about DCC file

DCC file = DCC file is a camera configuration setting file.

Why some model have many DCC file ?
         -Because of many manufacturer supplier & version for the camera module .
 

Which situation of i should write the DDC file to the phone ?
       -When open camera function, the phone screen show blank or black color, after that
         display an error of 'Operation failed' & 'Camera on standby'.
 

Why i was tried all DCC file but the problem still remain ?
    -That is Hardware problem. Take out the camera & clean, adjust or change it.
     Please make sure the camera module is fit when insert into the socket !
 

Which SW or BOX is supported write this DDC file to the phone ?
      -The DCC file that attach here is converted from Original DCC file to .pm format.
       So all SW or BOX from the market that have Write PM function is supported. Just load
       the DCC file & simply press write PM

Please test from one by one by higher version of the DCC file 1st !

All model of Nokia untill Feb 2010 that are using DCC file to configuration camera HW is listed below :


1680c
1680c_GR0103D101260C206C02_v001.009.pm
1680c_GR0103D1012601022C00_v001.004.pm
1680c_GR09733814140C206C02_v001.003.pm
1680c_GR097338141401022C00_v001.002.pm


2220s
2220s_GR0103D101260C213402_v001.008.pm
2220s_GR0103D1012601022E05_v001.007.pm


2330c
2330c_GR0103D101260C213402_v001.008.pm
2330c_GR0103D1012601022E05_v001.007.pm


2600c
2600c_GR0103D101260C206C02_v001.008.pm
2600c_GR0103D1012601022C00_v001.003.pm
2600c_GR09733814140C206C02_v001.003.pm
2600c_GR097338141401022C00_v001.002.pm

2680s
2680s_GR0103D101260C206C02_v001.009.pm
2680s_GR0103D1012601022C00_v001.004.pm
2680s_GR09733814140C206C02_v001.003.pm
2680s_GR097338141401022C00_v001.002.pm


2690
2690_NI00IIIIRR030C20C605_v003.001.pm
2690_NI00IIIIRR030C20C607_v003.003.pm
2690_NI00IIIIRR030C213401_v003.001.pm
2690_NI00IIIIRR030C213402_v003.002.pm
2690_NI00IIIIRR0301022E01_v003.001.pm
2690_NI00IIIIRR0301022E05_v003.002.pm
2690_NI00IIIIRR0301035420_v003.008.pm


2700c
2700c_NIMMIIIIRRFF0A021001_v002.007.pm
2700c_NIMMIIIIRRFF094B2F01_v002.014.pm
2700c_NIMMIIIIRRFF06150018_v002.008.pm
2700c_NIMMIIIIRRFF06150110_v002.005.pm


2720f_GR0103D10126095A1F05_v001.005.pm
2720f_GR0103D10126095A1F07_v001.006.pm
2720f_GR0103D10126095A1F87_v001.004.pm
2720f_GR0973381414095A1F05_v001.006.pm
2720f_GR0973381414095A1F07_v001.003.pm
2720f_GR0973381414095A1F87_v001.003.pm


2730c
2730c_NI00IIIIRR030102F201_v005.006.pm
2730c_NI00IIIIRR030102F202_v005.006.pm

2760
2760_GR0103D101260C206C02_v001.009.pm
2760_GR0103D1012601022C00_v001.004.pm
2760_GR09733814140C206C02_v001.003.pm
2760_GR097338141401022C00_v001.002.pm



3710f
3710f_NI00IIIIRR030C20C605_v003.001.pm
3710f_NI00IIIIRR030C20C607_v003.003.pm
3710f_NI00IIIIRR030C213401_v003.001.pm
3710f_NI00IIIIRR030C213402_v003.002.pm



5130
5130_NIMMIIIIRRFF0A021001_v002.007.pm
5130_NIMMIIIIRRFF094B2F01_v002.014.pm
5130_NIMMIIIIRRFF06150018_v002.008.pm
5130_NIMMIIIIRRFF06150110_v002.005.pm


6303i
6303i_NI00IIIIRR030C20C607_v003.003.pm
6303i_NI00IIIIRR0301035420_v003.008.pm



7230
7230_NI00IIIIRR030C20C607_v003.003.pm



E66_86L103000104094C1003_v001.017.pm
E66_86L10300010406260000_v001.509.pm
E66_86L10300010406260004_v001.509.pm
E66_8600030001040C208A03_v001.005.pm
E66_86000300010401022B04_v001.008.pm


X3
X3_NI00IIIIRR030C20C607_v003.003.pm
X3_NI00IIIIRR0301035420_v003.008.pm



E71
E71_86L103000104094C1003_v001.017.pm
E71_86L10300010406260000_v001.009.pm
E71_86L10300010406260004_v001.009.pm
E71_8600030001040C208A03_v001.005.pm
E71_86000300010401022B04_v001.008.pm

DOWNLOAD LINK FOR DCC FILE =  CLICK HERE

Thank you sweetdeep for sharing this information...

Cell phone repair tutorial - blumentritt Sta. Cruz Manila Philippines

Accepting students for cell phone repair tutorial.
Hands On and practical way of learning/teaching and also based on my 8 years of repairing cellphone.





I. Electronics

II. Preparing the Proper Tools For Repairing

III. Safety Procedures and Proper Handling of Tools and Test Equipments on Cellphone Repair

IV. Test and Check up Procedures on Basic Electronics Components

V. Reading Cellphone's Schematic Diagrams

VI. How to Find and Locate Components on PC BoardHow to Solder SMD Components Manually by Hand
How to Reball BGA Chips Manually by Hand

VII. Basic Hardware Handling Procedures
Hardware Troubleshooting Basics

VIII. Basic Mobile Phones Hardware Repair Techniques

IX. Basic on Software Handling
What is Flashing
What is Unlocking

Requirements: basic electronics knowledge.

All of these for as low as P 1,500.00/head

Big discounts for group training!

Training will be conducted for 3 days or it will depends on your availability.

This is now your chance to start your cellphone repair business!
Or have additional earnings aside from your monthly fix salary!

If interested contact me:

Edwin
09474347937

2630 intermittent power

History:  The phone was dropped unintentionally by the owner.

Solution:  Carefully inspect the PCB board.  In this tutorial I notice that V2000 is broken.  Remove or replace the component.

Regards;
Webmaster

Nokia C3-00 security code problem solution

This mobile phone was brought to me with a security code problem.  Their kids put a code and they did not know the security code entered.

This solution can only be solve using gsm gadgets.

Tools:
MX-key
usb cable
Firmware

Procedure:

1.  Open Mx key using usb connection.

2.  Load firmware mcu,ppm,cnt

3.  Connect usb to phone and disconnect the battery.  Tick Flash then insert the battery.

4.  Wait for the flashing to finish then you are done.

Logs:

MXKEY Serial: C0806116
Library version: 1.0.0.9627(20-04-2011), 1.0.0.16202(20-04-2011)
Processing MCU file: rm614__08.63.mcusw
 [BB5,XSR 1.6]  size: 27.90 MB
 Supported Ids: 2200050920030000, 22000509200C0000
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: D911896
CMT SYSTEM ASIC ID: 000000000000000022000509200C0000 [BCM21351 ver: 1.0]
CMT EM0 ID: 00005361
CMT PUBLIC ID: 00000000001697EEC539E14EA63A40D6FB8CE32A
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
CMT ROM ID: DE56D582BDDE7A3A
Loading CMT secondary boot code
 SecondaryBoot: BCM21351_usb2nd.fg [BB5]  version: 10.10.0 revision: 2.1 size: 0x3940
 Supported Ids: 22000209200C0000, 2200020920030000, 22000509200C0000, 2200050920030000
Secondary boot loaded.
FlashID0: 0000 0000  - 0000 0000 [unused/removed] type: NOR,CMT
FlashID1: 0010 0011  - 0000 0000 [unused/removed] type: NOR,CMT
FlashID2: 00EC 0030  - 0000 0431 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: MuxOneNAND,CMT
Loading CMT update server data
 Algorithm: BCM21351_XSR16_usbalg.fg [XSR 1.6]  version: 10.6.1 revision: 2.1 size: 0x9942E
 Supported Ids: 22000209200C0000, 2200020920030000, 22000509200C0000, 2200050920030000
Update server code loaded.
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: D911896
Verifying communication to device OK.
Reading CMT NPC (0x190 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
NPC_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.4\data\backup\BB5_35431804904701_CERT.rpl"
CMT PAPUBKEYS HASH: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
Storing certificate [NPC, CCC, HWC, RND, R&D]  OK.
Partitioning....
Partitioning complete
Erase size: 33.88 MB
CMT MuxOneNAND area [00000000-0001FFFF]
CMT MuxOneNAND area [00020000-000203FF]
CMT MuxOneNAND area [00060000-012FFFFF]
CMT MuxOneNAND area [01300000-01DFFFFF]
CMT MuxOneNAND area [02600000-029FFFFF]
Formating partition ...
Flash programming ...
CMT KEYS block sent
CMT ADA block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8 (RAP Certificate v1 232) sent
CMT UPDAPP block sent
CMT MCUSW block sent
CMT MCUSW1 block sent
CMT GENIO_INIT block sent
CMT ISA+DYNSW block sent
Programming completed in 7.125 s
Processing PPM file: rm614__08.63.ppm_i2
 [BB5,XSR 1.6]  size: 5.59 MB
 Supported Ids: 2200050920030000, 22000509200C0000
Erase size: 8 MB
CMT MuxOneNAND area [01E00000-025FFFFF]
Flash programming ...
Programming completed in 1.484 s
Processing CNT file: rm614__08.63.image_i2_059B6P7
 [BB5,XSR 1.6]  size: 14.10 MB
 Supported Ids: 2200050920030000, 22000509200C0000
Erase size: 75.31 MB
CMT MuxOneNAND area [02A00000-0753FFFF]
Formating partition ...
Flash programming ...
Programming completed in 3.703 s
Total time for flashing process(boot+erase+write) was 22.906 s
Waiting for device boot up ...
Device found: nmwcdc\Nokia C3-00 USB Phonet, PORT_ID: 35E31BEB
Verifying communication to device OK.

Phone Type: RM-614 (C3-00)
SW Version: V 08.63 25-03-11 RM-614 (c) Nokia           
Imei plain: 35431804904701-0
Product Code: 059C615
Battery voltage: 3752 mV, current: 1 mA
Language Pack:
- not available.

This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed

Imei net: 354318049047010
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF