2680s security code remove by Jaf

Hello today I removed a security code from a nokia 2680s.  I used my old but still working jaf box using the cracked version of 1.98.65.

Tools needed:

1.  Jaf box
2.  Jaf software cracked ver 1.98.65
3.  Data cable

Instructions:

1.  Connect data cable to the 2680s phone and Jaf box
2.  Run the software
3.  Tick Chk
4.  Tick info
5.  Tick factory settings and click service
6.  Celebrate you're done.

Here's the logs:

Getting MCU ID

MCU ID: 0x3162
FLASH ID0: 883C0020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1B 00 FF 10 40 00 00 00 00 00 00 00 00
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 04.91
03-09-08
RM-392
(c) Nokia          
HW version: 2001
PCI version:
UEM version: 4386
UPP version: 12642
RFIC version: 0500
DSP version: ICPR72_08w27_UPP
LCD version: SEIKO
PPM version: V 04.91
03-09-08
RM-392
(c) Nokia          
IC
BT MCM version: 2222-143
Content Pack version: Content: ic
V 04.91
03-09-08
RM-392
(c) Nokia          

Production serial number: IRD174491
Product code: 0567351
Module code: 0203726
Basic production code: 0556744
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 356390028850761
IMEI spare to net: 3A 65 93 00 82 58 70 06
IMEI SV to net: 33 65 93 00 82 58 70 16 F6
Master Code: 3213603630
Phone type: RM-392, Software version: 04.91, Language Pack: IC
User code: 12345

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-392.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0567351
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-392\

Searching for default location of ini...
Checking path: \Products\RM-392\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-392\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 4 seconds...
Done!

1280 light solution

This is the 1280 light solution.  It can be applied to 1616 and 1800 as well.  Just trace the line to determine which connection is broken.  This is recommended specially if you already replace LCD and LCD driver.
See the image below.

Back to:  Cellphone repair problems and solutions

1616 Water Damage shorted problem

1616 Water Damage shorted problem Solution

History:  The phone was borrowed from the owner by his friend.  After an hour the borrower returned the phone totally dead.

Diagnostic:  Using a VOM I found out that the phone is shorted.  Vbat is directly connected to ground.  I dissamble the phone and I found out that it was filled with moist and water.

Solution:

1.  Clean the board.  You could rinse it with water and washed it using liquid soap.  Dry it using hot air.
     You could use ultrasonic cleaner as well.

2.  After cleaning the board.  Test again using Multi-tester.  In this case shorted is still there.

3.  Using schematic diagram trace every electronic component that could be the culprit in this problem.

In this 1616 phone I found out that C2213 is the problem.  Replace or remove it and my problem was solved.

1616 shorted solution

Advance Merry Christmas to all dear readers!

2630 intermittent power

History:  The phone was dropped unintentionally by the owner.

Solution:  Carefully inspect the PCB board.  In this tutorial I notice that V2000 is broken.  Remove or replace the component.

Regards;
Webmaster

Nokia 1110 hardware repair guide

Nokia 1110 Hardware Repair Picture Guides

Nokia 1110 All repair Lay Out for the following hardware problems and failures:

Nokia 1110 Battery Low Problem Solution
Nokia 1110 Dead Set / No Power
Nokia 1110 Shorted Test Spots
Nokia 1110 Hands Free Solution
Nokia 1110 Insert Sim Card / No Sim Solution
Nokia 1110 Key Pad Failure or malfunction
Nokia 1110 LED Backlight Solution
Nokia 1110 Local Mode Test Mode
Nokia 1110 Mic /Mouthpiece failure solution
Nokia 1110 No LCD Display
Nokia 1110 Not Charging
Nokia 1110 Power Button - On/Off Switch
Nokia 1110 Ringer Buzzer
Nokia 1110 No Network Signal Solution
Nokia 1110  Earpiece Speaker Solution

You may like: Mobile Phone repair training