C3303k simways solution for insert sim problem
This solution was proven by me in one of my daily Samsung repair.
Check the broken lines in the picture and you will solve the problem.
Advance Happy New Year!
Wednesday, December 28, 2011
This solution was proven by me in one of my daily Samsung repair.
Check the broken lines in the picture and you will solve the problem.
Advance Happy New Year!
Wednesday, December 21, 2011
History: The phone was borrowed from the owner by his friend. After an hour the borrower returned the phone totally dead.
Diagnostic: Using a VOM I found out that the phone is shorted. Vbat is directly connected to ground. I dissamble the phone and I found out that it was filled with moist and water.
Solution:
1. Clean the board. You could rinse it with water and washed it using liquid soap. Dry it using hot air.
You could use ultrasonic cleaner as well.
2. After cleaning the board. Test again using Multi-tester. In this case shorted is still there.
3. Using schematic diagram trace every electronic component that could be the culprit in this problem.
In this 1616 phone I found out that C2213 is the problem. Replace or remove it and my problem was solved.
Advance Merry Christmas to all dear readers!
Sunday, November 20, 2011
Monday, November 14, 2011
Accepting students for cell phone repair tutorial.
Hands On and practical way of learning/teaching and also based on my 8 years of repairing cellphone.
I. Electronics
II. Preparing the Proper Tools For Repairing
III. Safety Procedures and Proper Handling of Tools and Test Equipments on Cellphone Repair
IV. Test and Check up Procedures on Basic Electronics Components
V. Reading Cellphone's Schematic Diagrams
VI. How to Find and Locate Components on PC BoardHow to Solder SMD Components Manually by Hand
How to Reball BGA Chips Manually by Hand
VII. Basic Hardware Handling Procedures
Hardware Troubleshooting Basics
VIII. Basic Mobile Phones Hardware Repair Techniques
IX. Basic on Software Handling
What is Flashing
What is Unlocking
Requirements: basic electronics knowledge.
All of these for as low as P 1,500.00/head
Big discounts for group training!
Training will be conducted for 3 days or it will depends on your availability.
This is now your chance to start your cellphone repair business!
Or have additional earnings aside from your monthly fix salary!
If interested contact me:
Edwin
09474347937
Wednesday, November 9, 2011
Saturday, November 5, 2011
Friday, August 5, 2011
Samsung C3303k insert sim solution
This solution was proven by me in one of my daily Samsung repair.
Check the broken lines in the picture and you will solve the problem.
Advance Happy New Year!
1616 Water Damage shorted problem
1616 Water Damage shorted problem Solution
History: The phone was borrowed from the owner by his friend. After an hour the borrower returned the phone totally dead.
Diagnostic: Using a VOM I found out that the phone is shorted. Vbat is directly connected to ground. I dissamble the phone and I found out that it was filled with moist and water.
Solution:
1. Clean the board. You could rinse it with water and washed it using liquid soap. Dry it using hot air.
You could use ultrasonic cleaner as well.
2. After cleaning the board. Test again using Multi-tester. In this case shorted is still there.
3. Using schematic diagram trace every electronic component that could be the culprit in this problem.
In this 1616 phone I found out that C2213 is the problem. Replace or remove it and my problem was solved.
 |
| 1616 shorted solution |
Advance Merry Christmas to all dear readers!
Nokia camera on standby and operation failed solution
This solution can be applied in all Gsm gadgets box using a DCC file.
FAQ about DCC file
DCC file = DCC file is a camera configuration setting file.
FAQ about DCC file
DCC file = DCC file is a camera configuration setting file.
Why some model have many DCC file ?
-Because of many manufacturer supplier & version for the camera module .
-Because of many manufacturer supplier & version for the camera module .
Which situation of i should write the DDC file to the phone ?
-When open camera function, the phone screen show blank or black color, after that
display an error of 'Operation failed' & 'Camera on standby'.
-When open camera function, the phone screen show blank or black color, after that
display an error of 'Operation failed' & 'Camera on standby'.
Why i was tried all DCC file but the problem still remain ?
-That is Hardware problem. Take out the camera & clean, adjust or change it.
Please make sure the camera module is fit when insert into the socket !
-That is Hardware problem. Take out the camera & clean, adjust or change it.
Please make sure the camera module is fit when insert into the socket !
Which SW or BOX is supported write this DDC file to the phone ?
-The DCC file that attach here is converted from Original DCC file to .pm format.
So all SW or BOX from the market that have Write PM function is supported. Just load
the DCC file & simply press write PM
Please test from one by one by higher version of the DCC file 1st !
All model of Nokia untill Feb 2010 that are using DCC file to configuration camera HW is listed below :
1680c
1680c_GR0103D101260C206C02_v001.009.pm
1680c_GR0103D1012601022C00_v001.004.pm
1680c_GR09733814140C206C02_v001.003.pm
1680c_GR097338141401022C00_v001.002.pm
2220s
2220s_GR0103D101260C213402_v001.008.pm
2220s_GR0103D1012601022E05_v001.007.pm
2330c
2330c_GR0103D101260C213402_v001.008.pm
2330c_GR0103D1012601022E05_v001.007.pm
2600c
2600c_GR0103D101260C206C02_v001.008.pm
2600c_GR0103D1012601022C00_v001.003.pm
2600c_GR09733814140C206C02_v001.003.pm
2600c_GR097338141401022C00_v001.002.pm
2680s
2680s_GR0103D101260C206C02_v001.009.pm
2680s_GR0103D1012601022C00_v001.004.pm
2680s_GR09733814140C206C02_v001.003.pm
2680s_GR097338141401022C00_v001.002.pm
2690
2690_NI00IIIIRR030C20C605_v003.001.pm
2690_NI00IIIIRR030C20C607_v003.003.pm
2690_NI00IIIIRR030C213401_v003.001.pm
2690_NI00IIIIRR030C213402_v003.002.pm
2690_NI00IIIIRR0301022E01_v003.001.pm
2690_NI00IIIIRR0301022E05_v003.002.pm
2690_NI00IIIIRR0301035420_v003.008.pm
2700c
2700c_NIMMIIIIRRFF0A021001_v002.007.pm
2700c_NIMMIIIIRRFF094B2F01_v002.014.pm
2700c_NIMMIIIIRRFF06150018_v002.008.pm
2700c_NIMMIIIIRRFF06150110_v002.005.pm
2720f_GR0103D10126095A1F05_v001.005.pm
2720f_GR0103D10126095A1F07_v001.006.pm
2720f_GR0103D10126095A1F87_v001.004.pm
2720f_GR0973381414095A1F05_v001.006.pm
2720f_GR0973381414095A1F07_v001.003.pm
2720f_GR0973381414095A1F87_v001.003.pm
2730c
2730c_NI00IIIIRR030102F201_v005.006.pm
2730c_NI00IIIIRR030102F202_v005.006.pm
2760
2760_GR0103D101260C206C02_v001.009.pm
2760_GR0103D1012601022C00_v001.004.pm
2760_GR09733814140C206C02_v001.003.pm
2760_GR097338141401022C00_v001.002.pm
3710f
3710f_NI00IIIIRR030C20C605_v003.001.pm
3710f_NI00IIIIRR030C20C607_v003.003.pm
3710f_NI00IIIIRR030C213401_v003.001.pm
3710f_NI00IIIIRR030C213402_v003.002.pm
5130
5130_NIMMIIIIRRFF0A021001_v002.007.pm
5130_NIMMIIIIRRFF094B2F01_v002.014.pm
5130_NIMMIIIIRRFF06150018_v002.008.pm
5130_NIMMIIIIRRFF06150110_v002.005.pm
6303i
6303i_NI00IIIIRR030C20C607_v003.003.pm
6303i_NI00IIIIRR0301035420_v003.008.pm
7230
7230_NI00IIIIRR030C20C607_v003.003.pm
E66_86L103000104094C1003_v001.017.pm
E66_86L10300010406260000_v001.509.pm
E66_86L10300010406260004_v001.509.pm
E66_8600030001040C208A03_v001.005.pm
E66_86000300010401022B04_v001.008.pm
X3
X3_NI00IIIIRR030C20C607_v003.003.pm
X3_NI00IIIIRR0301035420_v003.008.pm
E71
E71_86L103000104094C1003_v001.017.pm
E71_86L10300010406260000_v001.009.pm
E71_86L10300010406260004_v001.009.pm
E71_8600030001040C208A03_v001.005.pm
E71_86000300010401022B04_v001.008.pm
-The DCC file that attach here is converted from Original DCC file to .pm format.
So all SW or BOX from the market that have Write PM function is supported. Just load
the DCC file & simply press write PM
Please test from one by one by higher version of the DCC file 1st !
All model of Nokia untill Feb 2010 that are using DCC file to configuration camera HW is listed below :
1680c
1680c_GR0103D101260C206C02_v001.009.pm
1680c_GR0103D1012601022C00_v001.004.pm
1680c_GR09733814140C206C02_v001.003.pm
1680c_GR097338141401022C00_v001.002.pm
2220s
2220s_GR0103D101260C213402_v001.008.pm
2220s_GR0103D1012601022E05_v001.007.pm
2330c
2330c_GR0103D101260C213402_v001.008.pm
2330c_GR0103D1012601022E05_v001.007.pm
2600c
2600c_GR0103D101260C206C02_v001.008.pm
2600c_GR0103D1012601022C00_v001.003.pm
2600c_GR09733814140C206C02_v001.003.pm
2600c_GR097338141401022C00_v001.002.pm
2680s
2680s_GR0103D101260C206C02_v001.009.pm
2680s_GR0103D1012601022C00_v001.004.pm
2680s_GR09733814140C206C02_v001.003.pm
2680s_GR097338141401022C00_v001.002.pm
2690
2690_NI00IIIIRR030C20C605_v003.001.pm
2690_NI00IIIIRR030C20C607_v003.003.pm
2690_NI00IIIIRR030C213401_v003.001.pm
2690_NI00IIIIRR030C213402_v003.002.pm
2690_NI00IIIIRR0301022E01_v003.001.pm
2690_NI00IIIIRR0301022E05_v003.002.pm
2690_NI00IIIIRR0301035420_v003.008.pm
2700c
2700c_NIMMIIIIRRFF0A021001_v002.007.pm
2700c_NIMMIIIIRRFF094B2F01_v002.014.pm
2700c_NIMMIIIIRRFF06150018_v002.008.pm
2700c_NIMMIIIIRRFF06150110_v002.005.pm
2720f_GR0103D10126095A1F05_v001.005.pm
2720f_GR0103D10126095A1F07_v001.006.pm
2720f_GR0103D10126095A1F87_v001.004.pm
2720f_GR0973381414095A1F05_v001.006.pm
2720f_GR0973381414095A1F07_v001.003.pm
2720f_GR0973381414095A1F87_v001.003.pm
2730c
2730c_NI00IIIIRR030102F201_v005.006.pm
2730c_NI00IIIIRR030102F202_v005.006.pm
2760
2760_GR0103D101260C206C02_v001.009.pm
2760_GR0103D1012601022C00_v001.004.pm
2760_GR09733814140C206C02_v001.003.pm
2760_GR097338141401022C00_v001.002.pm
3710f
3710f_NI00IIIIRR030C20C605_v003.001.pm
3710f_NI00IIIIRR030C20C607_v003.003.pm
3710f_NI00IIIIRR030C213401_v003.001.pm
3710f_NI00IIIIRR030C213402_v003.002.pm
5130
5130_NIMMIIIIRRFF0A021001_v002.007.pm
5130_NIMMIIIIRRFF094B2F01_v002.014.pm
5130_NIMMIIIIRRFF06150018_v002.008.pm
5130_NIMMIIIIRRFF06150110_v002.005.pm
6303i
6303i_NI00IIIIRR030C20C607_v003.003.pm
6303i_NI00IIIIRR0301035420_v003.008.pm
7230
7230_NI00IIIIRR030C20C607_v003.003.pm
E66_86L103000104094C1003_v001.017.pm
E66_86L10300010406260000_v001.509.pm
E66_86L10300010406260004_v001.509.pm
E66_8600030001040C208A03_v001.005.pm
E66_86000300010401022B04_v001.008.pm
X3
X3_NI00IIIIRR030C20C607_v003.003.pm
X3_NI00IIIIRR0301035420_v003.008.pm
E71
E71_86L103000104094C1003_v001.017.pm
E71_86L10300010406260000_v001.009.pm
E71_86L10300010406260004_v001.009.pm
E71_8600030001040C208A03_v001.005.pm
E71_86000300010401022B04_v001.008.pm
DOWNLOAD LINK FOR DCC FILE = CLICK HERE
Thank you sweetdeep for sharing this information...
Cell phone repair tutorial - blumentritt Sta. Cruz Manila Philippines
Accepting students for cell phone repair tutorial.
Hands On and practical way of learning/teaching and also based on my 8 years of repairing cellphone.
I. Electronics
II. Preparing the Proper Tools For Repairing
III. Safety Procedures and Proper Handling of Tools and Test Equipments on Cellphone Repair
IV. Test and Check up Procedures on Basic Electronics Components
V. Reading Cellphone's Schematic Diagrams
VI. How to Find and Locate Components on PC BoardHow to Solder SMD Components Manually by Hand
How to Reball BGA Chips Manually by Hand
VII. Basic Hardware Handling Procedures
Hardware Troubleshooting Basics
VIII. Basic Mobile Phones Hardware Repair Techniques
IX. Basic on Software Handling
What is Flashing
What is Unlocking
Requirements: basic electronics knowledge.
All of these for as low as P 1,500.00/head
Big discounts for group training!
Training will be conducted for 3 days or it will depends on your availability.
This is now your chance to start your cellphone repair business!
Or have additional earnings aside from your monthly fix salary!
If interested contact me:
Edwin
09474347937
2630 intermittent power
History: The phone was dropped unintentionally by the owner.
Solution: Carefully inspect the PCB board. In this tutorial I notice that V2000 is broken. Remove or replace the component.
Regards;
Webmaster
Solution: Carefully inspect the PCB board. In this tutorial I notice that V2000 is broken. Remove or replace the component.
Regards;
Webmaster
Nokia C3-00 security code problem solution
This mobile phone was brought to me with a security code problem. Their kids put a code and they did not know the security code entered.
This solution can only be solve using gsm gadgets.
Tools:
MX-key
usb cable
Firmware
Procedure:
1. Open Mx key using usb connection.
2. Load firmware mcu,ppm,cnt
3. Connect usb to phone and disconnect the battery. Tick Flash then insert the battery.
4. Wait for the flashing to finish then you are done.
Logs:
MXKEY Serial: C0806116
Library version: 1.0.0.9627(20-04-2011), 1.0.0.16202(20-04-2011)
Processing MCU file: rm614__08.63.mcusw
[BB5,XSR 1.6] size: 27.90 MB
Supported Ids: 2200050920030000, 22000509200C0000
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: D911896
CMT SYSTEM ASIC ID: 000000000000000022000509200C0000 [BCM21351 ver: 1.0]
CMT EM0 ID: 00005361
CMT PUBLIC ID: 00000000001697EEC539E14EA63A40D6FB8CE32A
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
CMT ROM ID: DE56D582BDDE7A3A
Loading CMT secondary boot code
SecondaryBoot: BCM21351_usb2nd.fg [BB5] version: 10.10.0 revision: 2.1 size: 0x3940
Supported Ids: 22000209200C0000, 2200020920030000, 22000509200C0000, 2200050920030000
Secondary boot loaded.
FlashID0: 0000 0000 - 0000 0000 [unused/removed] type: NOR,CMT
FlashID1: 0010 0011 - 0000 0000 [unused/removed] type: NOR,CMT
FlashID2: 00EC 0030 - 0000 0431 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: MuxOneNAND,CMT
Loading CMT update server data
Algorithm: BCM21351_XSR16_usbalg.fg [XSR 1.6] version: 10.6.1 revision: 2.1 size: 0x9942E
Supported Ids: 22000209200C0000, 2200020920030000, 22000509200C0000, 2200050920030000
Update server code loaded.
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: D911896
Verifying communication to device OK.
Reading CMT NPC (0x190 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
NPC_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.4\data\backup\BB5_35431804904701_CERT.rpl"
CMT PAPUBKEYS HASH: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
Storing certificate [NPC, CCC, HWC, RND, R&D] OK.
Partitioning....
Partitioning complete
Erase size: 33.88 MB
CMT MuxOneNAND area [00000000-0001FFFF]
CMT MuxOneNAND area [00020000-000203FF]
CMT MuxOneNAND area [00060000-012FFFFF]
CMT MuxOneNAND area [01300000-01DFFFFF]
CMT MuxOneNAND area [02600000-029FFFFF]
Formating partition ...
Flash programming ...
CMT KEYS block sent
CMT ADA block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8 (RAP Certificate v1 232) sent
CMT UPDAPP block sent
CMT MCUSW block sent
CMT MCUSW1 block sent
CMT GENIO_INIT block sent
CMT ISA+DYNSW block sent
Programming completed in 7.125 s
Processing PPM file: rm614__08.63.ppm_i2
[BB5,XSR 1.6] size: 5.59 MB
Supported Ids: 2200050920030000, 22000509200C0000
Erase size: 8 MB
CMT MuxOneNAND area [01E00000-025FFFFF]
Flash programming ...
Programming completed in 1.484 s
Processing CNT file: rm614__08.63.image_i2_059B6P7
[BB5,XSR 1.6] size: 14.10 MB
Supported Ids: 2200050920030000, 22000509200C0000
Erase size: 75.31 MB
CMT MuxOneNAND area [02A00000-0753FFFF]
Formating partition ...
Flash programming ...
Programming completed in 3.703 s
Total time for flashing process(boot+erase+write) was 22.906 s
Waiting for device boot up ...
Device found: nmwcdc\Nokia C3-00 USB Phonet, PORT_ID: 35E31BEB
Verifying communication to device OK.
Phone Type: RM-614 (C3-00)
SW Version: V 08.63 25-03-11 RM-614 (c) Nokia
Imei plain: 35431804904701-0
Product Code: 059C615
Battery voltage: 3752 mV, current: 1 mA
Language Pack:
- not available.
This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed
Imei net: 354318049047010
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
This solution can only be solve using gsm gadgets.
Tools:
MX-key
usb cable
Firmware
Procedure:
1. Open Mx key using usb connection.
2. Load firmware mcu,ppm,cnt
3. Connect usb to phone and disconnect the battery. Tick Flash then insert the battery.
4. Wait for the flashing to finish then you are done.
Logs:
MXKEY Serial: C0806116
Library version: 1.0.0.9627(20-04-2011), 1.0.0.16202(20-04-2011)
Processing MCU file: rm614__08.63.mcusw
[BB5,XSR 1.6] size: 27.90 MB
Supported Ids: 2200050920030000, 22000509200C0000
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: D911896
CMT SYSTEM ASIC ID: 000000000000000022000509200C0000 [BCM21351 ver: 1.0]
CMT EM0 ID: 00005361
CMT PUBLIC ID: 00000000001697EEC539E14EA63A40D6FB8CE32A
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
CMT ROM ID: DE56D582BDDE7A3A
Loading CMT secondary boot code
SecondaryBoot: BCM21351_usb2nd.fg [BB5] version: 10.10.0 revision: 2.1 size: 0x3940
Supported Ids: 22000209200C0000, 2200020920030000, 22000509200C0000, 2200050920030000
Secondary boot loaded.
FlashID0: 0000 0000 - 0000 0000 [unused/removed] type: NOR,CMT
FlashID1: 0010 0011 - 0000 0000 [unused/removed] type: NOR,CMT
FlashID2: 00EC 0030 - 0000 0431 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: MuxOneNAND,CMT
Loading CMT update server data
Algorithm: BCM21351_XSR16_usbalg.fg [XSR 1.6] version: 10.6.1 revision: 2.1 size: 0x9942E
Supported Ids: 22000209200C0000, 2200020920030000, 22000509200C0000, 2200050920030000
Update server code loaded.
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: D911896
Verifying communication to device OK.
Reading CMT NPC (0x190 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
NPC_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.4\data\backup\BB5_35431804904701_CERT.rpl"
CMT PAPUBKEYS HASH: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
Storing certificate [NPC, CCC, HWC, RND, R&D] OK.
Partitioning....
Partitioning complete
Erase size: 33.88 MB
CMT MuxOneNAND area [00000000-0001FFFF]
CMT MuxOneNAND area [00020000-000203FF]
CMT MuxOneNAND area [00060000-012FFFFF]
CMT MuxOneNAND area [01300000-01DFFFFF]
CMT MuxOneNAND area [02600000-029FFFFF]
Formating partition ...
Flash programming ...
CMT KEYS block sent
CMT ADA block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8 (RAP Certificate v1 232) sent
CMT UPDAPP block sent
CMT MCUSW block sent
CMT MCUSW1 block sent
CMT GENIO_INIT block sent
CMT ISA+DYNSW block sent
Programming completed in 7.125 s
Processing PPM file: rm614__08.63.ppm_i2
[BB5,XSR 1.6] size: 5.59 MB
Supported Ids: 2200050920030000, 22000509200C0000
Erase size: 8 MB
CMT MuxOneNAND area [01E00000-025FFFFF]
Flash programming ...
Programming completed in 1.484 s
Processing CNT file: rm614__08.63.image_i2_059B6P7
[BB5,XSR 1.6] size: 14.10 MB
Supported Ids: 2200050920030000, 22000509200C0000
Erase size: 75.31 MB
CMT MuxOneNAND area [02A00000-0753FFFF]
Formating partition ...
Flash programming ...
Programming completed in 3.703 s
Total time for flashing process(boot+erase+write) was 22.906 s
Waiting for device boot up ...
Device found: nmwcdc\Nokia C3-00 USB Phonet, PORT_ID: 35E31BEB
Verifying communication to device OK.
Phone Type: RM-614 (C3-00)
SW Version: V 08.63 25-03-11 RM-614 (c) Nokia
Imei plain: 35431804904701-0
Product Code: 059C615
Battery voltage: 3752 mV, current: 1 mA
Language Pack:
- not available.
This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed
Imei net: 354318049047010
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
How can I learn to repair phone?
Are you are just starting your career in servicing mobile phone? Or are you bored with your job and you want to start a new path in repairing mobile phone? The very first question come into your mind is how can I learn to repair phone? All of these question will be answered in this blog.
I will answer your question according to my experience. Every answer differs from different point of view and different people. Let me share to you my experience how I started my career in servicing broken cell phone.
I was an Instructor in a Computer School here in our country. I am a professor of math and computer technical students. I was happy for the two years I was teaching after sometime I got bored. My job is a routine. I come to school early and go home on time. Until such time I was assigned to teach cellphone repair. Teaching cellphone repair at first was very hard I have to familiarize myself from the different components inside the mobile phone.
The very key in repairing mobile phone first to study basic electronics for me It was not hard because I graduated with a degree in electronics. To learn to repair phone you need first to enroll yourself to a technical school major in electronics. Why? because all of the components you will be dealing in servicing cell phone are all electronics components.
My degree in electronics cut the shortcut for me to learn servicing mobile phone. All I need to know are the basic components inside the phone and find out what are the functions of those components.
During my years in servicing mobile I have to go back to basic. I need to identify components, read schematic diagrams, read voltage, check for the continuity and everything that could learn when I was studying.
Now that you have basic skills and understanding in electronics. It would be faster to learn in repairing mobile phone by hanging out cellphone techician guys. Yes I did that too. Even though I was a graduate of electronics I needed to hang out with people specially those are veteran in repairing mobile phone. Believed me it will cut the road in learning how to repair mobile phone. You will now learn the basic but you will learn the tips and tricks which later you understand that it all came from the basic electronics you learned from the school.
You can enhance more your skills in repairing mobile phone by joining online forums and community whose expertise are electronics and cell phone technician.
Finally and most important to learn how to repair phone is you must love what you are doing. Yes you cant be forever in this career if you will not have passion and drive to do everyday what you have to do.
That is for now see you guys later.
You may like: Mobile phone repair training
I will answer your question according to my experience. Every answer differs from different point of view and different people. Let me share to you my experience how I started my career in servicing broken cell phone.
I was an Instructor in a Computer School here in our country. I am a professor of math and computer technical students. I was happy for the two years I was teaching after sometime I got bored. My job is a routine. I come to school early and go home on time. Until such time I was assigned to teach cellphone repair. Teaching cellphone repair at first was very hard I have to familiarize myself from the different components inside the mobile phone.
The very key in repairing mobile phone first to study basic electronics for me It was not hard because I graduated with a degree in electronics. To learn to repair phone you need first to enroll yourself to a technical school major in electronics. Why? because all of the components you will be dealing in servicing cell phone are all electronics components.
My degree in electronics cut the shortcut for me to learn servicing mobile phone. All I need to know are the basic components inside the phone and find out what are the functions of those components.
During my years in servicing mobile I have to go back to basic. I need to identify components, read schematic diagrams, read voltage, check for the continuity and everything that could learn when I was studying.
Now that you have basic skills and understanding in electronics. It would be faster to learn in repairing mobile phone by hanging out cellphone techician guys. Yes I did that too. Even though I was a graduate of electronics I needed to hang out with people specially those are veteran in repairing mobile phone. Believed me it will cut the road in learning how to repair mobile phone. You will now learn the basic but you will learn the tips and tricks which later you understand that it all came from the basic electronics you learned from the school.
You can enhance more your skills in repairing mobile phone by joining online forums and community whose expertise are electronics and cell phone technician.
Finally and most important to learn how to repair phone is you must love what you are doing. Yes you cant be forever in this career if you will not have passion and drive to do everyday what you have to do.
That is for now see you guys later.
You may like: Mobile phone repair training
Subscribe to:
Posts (Atom)
