Nokia 5130 Contact Service Done By Nokia Best Ver 1.75 By Gsmmithun

If you are just starting out and you don't have enough budget to start your mobile repair business, then you can start to flash Nokia using thing Nokia Best v1.75.  I solved 5130 Contact Service using this software.

Here's what you need:

1.  USB cable of 5130
2.  Drivers for Nokia
3.  Nokia Best Software
4.  5130 Firmware

Steps:

1.  Download and install first the nokia drivers into your PC.
2.  Download and run Nokia Best
3.  Download and prepare the nokia firmware
4.  Run the software and choose the setting in my picture below.
5.  Power of the cellphone and connect the cable.
6.  Click flash and power on the mobile when ask.
7.  Install the drivers prior flashing the phone.
8.  Wait until the phone flashed and reboot in normal.
9.  Celebrate! Your phone now is back to factory settings. 

Logs:

card found: A1B5CCE8
registered to: CycloneBox

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm495__07.97.mcusw
PPM : rm495__07.97.ppm_x
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
ASIC ID: 000000010000022600010006030C192101033000
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 1E600017EC118C561C15E274410628867F1F803E
CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm495__07.97.mcusw
Found 6 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
Result: 0000
Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
Result: 0000
Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT
Result: 0000
Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:02:28
Write : Processing rm495__07.97.mcusw
Total 1178 [1178/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
TIME : Write time : 00:01:47
MCU Write done
===Flashing [PPM]===
Erase : Processing rm495__07.97.ppm_x
Found 1 areas to erase
Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:06
Write : Processing rm495__07.97.ppm_x
Total 494 [494/0/0] blocks to write, writing...
TIME : Write time : 00:00:49
PPM Write done
ADL : End flashing

Flashing done!
Total flash time : 00:06:11
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software Info: V 07.97 13-09-10 RM-495 (c) Nokia
IMEI: 358229038967025
PPM version : V 07.97 13-09-10 RM-495 (c) Nokia X
Product code: 0586824
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 21 certs
Data exist, skip certificate repair...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:07:20

Connect phone on selected interface...

Android Share 2330 Too Many Pattern Step by Step Solution

Hello again.  Today I'm going to share to you how to solve this Android Share 2330 Too Many  Pattern problem.  In the past of my solution are manual format.  Just like any smartphone android I just press either volume up or volume down plus power and then I could  go to the setup where I could wiped and restart the tablet automatically.

Now this one is not the same.  I tried my trick for 5 to 10 minutes but nothing works.  Now here's my guide on how you could fix this problem.

Things you need:

1.  Usb cable - To connect your tablet to your PC.
2.  PC - where will run your software to reset/factory reset the tablet

Software you need:

1.  Adbdriver Installer
2.  Prince Android Toolkit V2

Procedure:

1.  Power on your tablet and connect it to your PC.  My computer runs Windows XP OS.

2.  Install Adbdriver installer.  After you install it you will the picture below to determine that you install it successfully and the tablet is detected to the computer.

3.  Next Run Prince Android Toolkit V2.  What you want to do here is to press number 5 and press Enter button.  The Android will reboot and it will now reset to its factory settings.

Congratulations!  You're done :)

Here's the output of my work.

Have a great day everyone!

How To Hard Reset Samsung GT-5300 Procedure Too Many Password

Hello again!  This is another easy solution for cellphone technician to earn money.  Problem we are going to solve now is Samsung GT-5300 too many password attempt.

Ok follow the procedure below:

1.  Remove the battery, simcard and memory card.

2.  Replace battery.

3.. Hold volume down + Home button simultaneously

4.  Power On and release the button power button upon startup.

5.  After the phone goes into to recovery mode release volume down and home button.

6.  From the menu select format data menu.  Use the volume up/down to change menus and hit home   button to select the menu.  Wait for the phone finish its self resetting program.

7.  Finally select reset menu and the phone now will reboot to factory settings.

I hope you follow this simple steps.

Ti'll my next blog see yah ;)

Cherry Mobile Jade "Wrong pattern" solution

Hello again just want to share another solution for you here.  This one is Cherry Mobile Jade "wrong pattern" problem.  It's like too many password attempt problem.  Check it out now.

This one took me literally 15 minutes.  Most of the cherry mobiles hard solution can be found on the internet but these one I can't find any hint how to solve this problem.

When I tried to do the volume up + pwr on I was redirected to fast boot, normal boot and the other option , there's nothing change from the phone.

But when I tried the volume down + power on the phone boot to a bunch of chinese/korean language which I can't understand.

There's no other options but to try each command.  On the sixth option I select it using power on and then press volume up 2x.   The mobile reset on its own and now it is on its factory settings again.

I hope you get the tips how I solved it.  Leave a comment below if you need help from solving this.

Cherry Mobile Flare S100 "Too many password attempt" solution

I just received this Cherry Mobile Flare S100 "Too many password attempt" problem here in my shop.  The best to solve this is to hard reset the unit.  Check the step by step procedure here.

Steps:

1.  Turn off the mobile.

2.  Remove the battery and put it back again.

3.  Press Volume up + power on

4.  You will be ask to select your option from the menu.  Select the "wipe data/factory reset" by using the volume up or down and by pressing power on button shortly.

5.  The mobile will reformat the phone by itself.

6.  You will choose now another option and that is to "reboot the phone".

Finally the phone will restart and will go to the actual initial setup.  Perform the setup and you're are done solving "too many password attempt" problem.