Nokia 5130 Contact Service Done By Nokia Best Ver 1.75 By Gsmmithun

If you are just starting out and you don't have enough budget to start your mobile repair business, then you can start to flash Nokia using thing Nokia Best v1.75.  I solved 5130 Contact Service using this software.

Here's what you need:

1.  USB cable of 5130
2.  Drivers for Nokia
3.  Nokia Best Software
4.  5130 Firmware

Steps:

1.  Download and install first the nokia drivers into your PC.
2.  Download and run Nokia Best
3.  Download and prepare the nokia firmware
4.  Run the software and choose the setting in my picture below.
5.  Power of the cellphone and connect the cable.
6.  Click flash and power on the mobile when ask.
7.  Install the drivers prior flashing the phone.
8.  Wait until the phone flashed and reboot in normal.
9.  Celebrate! Your phone now is back to factory settings. 

Logs:

card found: A1B5CCE8
registered to: CycloneBox

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm495__07.97.mcusw
PPM : rm495__07.97.ppm_x
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
ASIC ID: 000000010000022600010006030C192101033000
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 1E600017EC118C561C15E274410628867F1F803E
CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm495__07.97.mcusw
Found 6 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
Result: 0000
Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
Result: 0000
Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT
Result: 0000
Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:02:28
Write : Processing rm495__07.97.mcusw
Total 1178 [1178/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
TIME : Write time : 00:01:47
MCU Write done
===Flashing [PPM]===
Erase : Processing rm495__07.97.ppm_x
Found 1 areas to erase
Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:06
Write : Processing rm495__07.97.ppm_x
Total 494 [494/0/0] blocks to write, writing...
TIME : Write time : 00:00:49
PPM Write done
ADL : End flashing

Flashing done!
Total flash time : 00:06:11
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software Info: V 07.97 13-09-10 RM-495 (c) Nokia
IMEI: 358229038967025
PPM version : V 07.97 13-09-10 RM-495 (c) Nokia X
Product code: 0586824
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 21 certs
Data exist, skip certificate repair...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:07:20

Connect phone on selected interface...

Phone repair 6120 light pictures

Here are various phone repair 6120 light pictures.  You can use this as your guide in repair light problem on this type of model.

 

Now you can troubleshoot  6120c light problem using these phone repair 6120 light pictures.

Back to:  Cellphone repair tutorial

Searching for phone...Found Reading SW version...Error reading rap ver!

I was able to repair a dead phone by using dead usb mode in Jaf.  All you have to do is to check the "dead usb" click flash, when ask to power on, insert battery and press power on.

See my logs here:

JAF version 1.98.64
Detected PKEY: 9000263A
Card life counter: 41.99%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B4, Driver version: 40000, Library version: 30112
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.36.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-495\

Searching for default location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\rm-607\Products\RM-495\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-495\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__06.65.image_el_blu
APE Variant file: NONE
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.image_el_red
APE Variant file: NONE
Backing up CRT...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Failed to backup CRT...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Not found!!!
Backing up CRT...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Failed to backup CRT...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Backing up CRT...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Failed to backup CRT...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...06.94
Reading battery value...4958 mV
Init usb flashing...
Reading flashid...
CMT: 307E0001 <=> SPANSION -> Type not in database
APE: 00000000 <=> Flash -> not detected
Verifing ADL communication... Status byte 2
Scanning selected flash files...
Found CMT ULO server in flash file...
ADL->Loader: Update Application Loader -> Single Chip
Loader len: 308032, CHK: 0x0378
ADL -> Sending loader...
.................................................................................................................................................................
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 2252, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw...
Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
Erasing cmt zone 00040000 - 000BFFFF ... Erase result: 0000
Erasing cmt zone 000C0000 - 0013FFFF ... Erase result: 0000
Erasing cmt zone 00140000 - 0137FFFF ... Erase result: 0000
Erasing cmt zone 01380000 - 0151FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el...
Erasing cmt zone 01520000 - 01DBFFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.image_el_red...
Erasing cmt zone 01DC0000 - 0215FFFF ... Erase result: 0000
Erasing cmt zone 02160000 - 03FBFFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
Processing C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el...
Processing C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.image_el_red...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: V 07.95
03-02-10
RM-495
(c) Nokia           
APESW: (null)
VariantSW: (null)
Prodcode: 0571943
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 0 seconds...
Done!
DCT4/BB5 counter: 769
Done!
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el
CNT Flash file: NONE
APE Variant file: NONE
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.ppm_i
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainian
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.ppm_i
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.image_i
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainian
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Not found!!!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Not found!!!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Not found!!!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Not found!!!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
    Elf2flash 09.07.000
    CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting..............................................................................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 3059, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.mcusw...
Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
Erasing cmt zone 00040000 - 000BFFFF ... Erase result: 0000
Erasing cmt zone 000C0000 - 0013FFFF ... Erase result: 0000
Erasing cmt zone 00140000 - 0119FFFF ... Erase result: 0000
Erasing cmt zone 011A0000 - 0133FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.ppm_i...
Erasing cmt zone 01340000 - 01BDFFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.image_i...
Erasing cmt zone 01BE0000 - 01F7FFFF ... Erase result: 0000
Erasing cmt zone 01F80000 - 03FBFFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.mcusw...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
Processing C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.ppm_i...
Processing C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.image_i...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: V 07.23
17-07-09
RM-436
(c) Nokia           
APESW: (null)
VariantSW: (null)
Prodcode: 0566832
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 0 seconds...
Done!
Done!

Here is the screenshot:

Back to:  Cellphone repair tutorial and solutions

6120c Unlocked using jaf and ufc v2 cable

This phone was originally locked to globe.  I successfully unlocked it using JAF and UFC V2 cable.

Here is the logs:

JAF version 1.98.66 beta5
Detected PKEY: 9000263A
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B4, Driver version: 40000, Library version: 30112
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.36.0
Changing mode...Done!
Booting phone...
Error sync the phone...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Booting phone...
Error sync the phone...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Booting phone...
Error sync the phone...
Booting phone...
Error sync the phone...
Booting phone...
Error sync the phone...
Booting phone...
FAST PHONE detected!

CMT Boot Data:
Asic ID: 000000010000022600010006400C192101021103
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 19E00107F97D005830ED2799F3B008D3B538F442
HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE00000000
ROM ID: A8C1D6713E691FF8
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\RAPIDOv11_2nd.fg
Loader version: 09.30.00 -> Revision: 0200
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 00000400 <=> Flash ID not in database
CMT Flash Data: NOT AVAILABLE
C:\Program Files\ODEON\JAF\Flash\RAPIDOv11_XSR15_alg.fg...
........Sending CMT HASH for PASUBTOC
.........................Sending CMT HASH for ALG
...........................Done!
CMT Loader Ready
Done!
Restarting phone...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 03.83
18-06-07
RM-243
(c) Nokia
HW version: 0801
PCI version:
RFIC version:     17141715
DSP version: pb06w41v34.3_rm243
Retu version: 15
Tahvo version: 22
Production serial number: MIH771315
Product code: 0554022
Module code:
Basic production code: 0548116
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 359807011125908
IMEI spare to net: 3A 95 08 07 11 21 95 00
IMEI SV to net: 33 95 08 07 11 21 95 10 F7

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 5150200000000000
Provider: Globe Telecom;Philippines
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 51502F
Block 2:
Lock 1: CLOSED -> Lock Data: 51502F

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-243.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0554022
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\

Searching for default location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\rm-607\Products\RM-243\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Done!
Backup simlock data first...
Setting local mode...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\RM-243_359807011125908_03.83_LCK_backup.pm
Done!
Reading simlock data...

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 5150200000000000
Provider: Globe Telecom;Philippines
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 51502F
Block 2:
Lock 1: CLOSED -> Lock Data: 51502F

Reading data...
Booting phone...
FAST PHONE detected!
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...

SL20 Unlock codes:
#pw+481031687297423+1#
#pw+306413200611337+2#
#pw+109940104283462+3#
#pw+914780133297161+4#
#pw+623298710909064+5#
#pw+484624674756434+6#
#pw+155055613023971+7#
Uploading code to phone...
Waiting for phone...
Reading soft info...
Unlocking...
Reseting phone....
Waiting for phone...
Reading soft info...
Reading simlock data...

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 5150200000000000
Provider: Globe Telecom;Philippines
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 51502F
Block 2:
Lock 1: CLOSED -> Lock Data: 51502F

Done!

Using enter codes in the unlock setting of JAF and input the code.  Then phone is fully unlocked.

Here is the image:

Back to:  Cellphone repair tutorials

3230 No power and local mode but finish flashing using any gadget

Here is the one of the solution for cellphone that can be full flash but still will not power on or local mode.  In this tutorial I encounter it in one my repair nokia 3230.

History: It was repaired from another cellphone repair shop. They only replace the battery terminal. it worked for an hour then suddenly it wont power anymore.

Procedure:

1. To be sure that the software is good I reprogram it using higher version of firmware available.

2. After flashing no local mode and the phone is still no power.

3. Carefully inspecting the terminal and using the multimeter I found out that BSI has no continuity. Using jumper wire I connect the BSI using the schematic diagram at jumper 136.

4. Now the phone has power then using software again full factory then mobile is perfectly working again.

see the missing connection below:

Back to:  Cellphone repair solutions

Nokia 3110c signal problem solution

There are many ways to solve signal problem in 3110c and this solution is one of the different solution to solve it!

To solve any signal problem in cell phone you need to determine first which part of the signal circuit is the problem.  Signal is divided into two circuit the Receiver or Rx circuit and Transmitter of the Tx circuit.

To determine if Rx or Tx problem use the manual search from the cellphone. You can find it at the settings.
If the phone can search all the service provider you have a good Rx circuit and bad Tx or If there were no signal found you have a bad Rx and possible good Tx.

In this case I could search for all of the service provider.

What I did was I replaced the capacitor from the picture I provided below:

Back to:Cell phone repair

Nokia C3-00 security code problem solution

This mobile phone was brought to me with a security code problem.  Their kids put a code and they did not know the security code entered.

This solution can only be solve using gsm gadgets.

Tools:
MX-key
usb cable
Firmware

Procedure:

1.  Open Mx key using usb connection.

2.  Load firmware mcu,ppm,cnt

3.  Connect usb to phone and disconnect the battery.  Tick Flash then insert the battery.

4.  Wait for the flashing to finish then you are done.

Logs:

MXKEY Serial: C0806116
Library version: 1.0.0.9627(20-04-2011), 1.0.0.16202(20-04-2011)
Processing MCU file: rm614__08.63.mcusw
 [BB5,XSR 1.6]  size: 27.90 MB
 Supported Ids: 2200050920030000, 22000509200C0000
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: D911896
CMT SYSTEM ASIC ID: 000000000000000022000509200C0000 [BCM21351 ver: 1.0]
CMT EM0 ID: 00005361
CMT PUBLIC ID: 00000000001697EEC539E14EA63A40D6FB8CE32A
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
CMT ROM ID: DE56D582BDDE7A3A
Loading CMT secondary boot code
 SecondaryBoot: BCM21351_usb2nd.fg [BB5]  version: 10.10.0 revision: 2.1 size: 0x3940
 Supported Ids: 22000209200C0000, 2200020920030000, 22000509200C0000, 2200050920030000
Secondary boot loaded.
FlashID0: 0000 0000  - 0000 0000 [unused/removed] type: NOR,CMT
FlashID1: 0010 0011  - 0000 0000 [unused/removed] type: NOR,CMT
FlashID2: 00EC 0030  - 0000 0431 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: MuxOneNAND,CMT
Loading CMT update server data
 Algorithm: BCM21351_XSR16_usbalg.fg [XSR 1.6]  version: 10.6.1 revision: 2.1 size: 0x9942E
 Supported Ids: 22000209200C0000, 2200020920030000, 22000509200C0000, 2200050920030000
Update server code loaded.
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: D911896
Verifying communication to device OK.
Reading CMT NPC (0x190 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
NPC_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.4\data\backup\BB5_35431804904701_CERT.rpl"
CMT PAPUBKEYS HASH: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
Storing certificate [NPC, CCC, HWC, RND, R&D]  OK.
Partitioning....
Partitioning complete
Erase size: 33.88 MB
CMT MuxOneNAND area [00000000-0001FFFF]
CMT MuxOneNAND area [00020000-000203FF]
CMT MuxOneNAND area [00060000-012FFFFF]
CMT MuxOneNAND area [01300000-01DFFFFF]
CMT MuxOneNAND area [02600000-029FFFFF]
Formating partition ...
Flash programming ...
CMT KEYS block sent
CMT ADA block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8 (RAP Certificate v1 232) sent
CMT UPDAPP block sent
CMT MCUSW block sent
CMT MCUSW1 block sent
CMT GENIO_INIT block sent
CMT ISA+DYNSW block sent
Programming completed in 7.125 s
Processing PPM file: rm614__08.63.ppm_i2
 [BB5,XSR 1.6]  size: 5.59 MB
 Supported Ids: 2200050920030000, 22000509200C0000
Erase size: 8 MB
CMT MuxOneNAND area [01E00000-025FFFFF]
Flash programming ...
Programming completed in 1.484 s
Processing CNT file: rm614__08.63.image_i2_059B6P7
 [BB5,XSR 1.6]  size: 14.10 MB
 Supported Ids: 2200050920030000, 22000509200C0000
Erase size: 75.31 MB
CMT MuxOneNAND area [02A00000-0753FFFF]
Formating partition ...
Flash programming ...
Programming completed in 3.703 s
Total time for flashing process(boot+erase+write) was 22.906 s
Waiting for device boot up ...
Device found: nmwcdc\Nokia C3-00 USB Phonet, PORT_ID: 35E31BEB
Verifying communication to device OK.

Phone Type: RM-614 (C3-00)
SW Version: V 08.63 25-03-11 RM-614 (c) Nokia           
Imei plain: 35431804904701-0
Product Code: 059C615
Battery voltage: 3752 mV, current: 1 mA
Language Pack:
- not available.

This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed

Imei net: 354318049047010
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7:   1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF