Friday, July 1, 2011

Unlock V3re

In this tutorial I will teach you how to unlock V3re. This procedure is based on my actual experience in unlocking v3re.


Tools:
Smartclip tool box
Smart tp ver 1

1. Disassemble the v3re phone.

2. Using the smart tp ver1 connect the supply and red tp to tp point.



3. Open the smartclip software then go to prepare phone. Check if there is good connectivity from the phone to the tool box by ticking search. If the phone is detected proceed to unlocking. Check the checkbox "unlock automatically after prepare phone" Then tick prepare phone.

4. Follow the procedure from the software.

5. Finally your done.


Screenshot:

Unlock V3re


Logs:

SmartMoto 4.05
S-Card: 934475416 Smart-Clip dongle, v 3.03, assigned Smart-Clip: 311929431 Europe, initializing... OK
Clip serial: 311929431, version: 5.02, initializing... OK
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Clip serial: 311929431, version: 5.02, initializing... OK
Searching for phone... no phone found
Searching for phone... found Motorola Phone (V3re), getting test interface... OK
Model V3re
Firmware R3442A_G_0E.43.08R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.C1
io timeout
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found Motorola Phone (V3re), getting test interface... OK
Model V3re
Firmware R3442A_G_0E.43.08R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.C1
io timeout
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found Motorola Phone (V3re), getting test interface... OK
Model V3re
Firmware R3442A_G_0E.43.08R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.C1
io timeout
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found Motorola Phone (V3re), getting test interface... OK
Model V3re
Firmware R3442A_G_0E.43.08R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.C1
io timeout
Clip serial: 311929431, version: 5.02, initializing... OK
Searching for phone... no phone found
Searching for phone... found Motorola Phone (V3re), getting test interface... OK
Model V3re
Firmware R3442A_G_0E.43.08R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.C1
io timeout
Clip serial: 311929431, version: 5.02, initializing... OK
Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... C.C1
io timeout
Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... C.C1
io timeout
Searching for phone... found Motorola Phone (V3re), getting test interface... OK
Model V3re
Firmware R3442A_G_0E.43.08R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.C1
io timeout
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found Motorola Phone (V3re), getting test interface... OK
Model V3re
Firmware R3442A_G_0E.43.08R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.C1
Sending boot... OK
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F901A7D2E2152358.bk_
Searching for phone... found Motorola Phone (V3re), getting test interface... OK
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.C1
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Reading phone boot version... 0.00
load error
Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... C.C1
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Reading phone boot version... 0.00
load error
Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... C.C1
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Reading phone boot version... 0.00
Reading flash id... Intel - M18LR256A
Phone group: V3re,K1/s
Hardware IMEI: 359615012166676
IMEI OTP status: locked
Security area saved to "PDS for S Flash Neptune LTE2 359615012166676.mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F901A7D2E2152358.bk_
Restore OK
Unlocking phone... OK

In this tutorial you learn how to use Smart-clip to unlock Motorola phones specially how to openline V3re


Do you want to learn how to unlock cell phone?

You may like:  Mobile phone repair training

0 comments:

Post a Comment

 
Total Pageviews
About this blog
This blog is a collection of Gsm and Gadgets firmwares, downloads, softwares, tools, etc.
free counters